Just like in the title my PC has an issue when it won’t turn on. Power button does nothing, fans do not spin, PC is completely dead. First time it happened was when I put it to sleep, sometimes it wouldn’t wake up so I just avoided putting it to sleep as a temporary solution that become quite permanent… Simple power off worked well enough but recently it won’t start even when I turn it off. If that happens I need to flip the power button on the PSU for a 30 or so seconds then it turn it back on and I can start PC no problems.

From what I read on the Internet people suggest faulty PSU. Is there a way to confirm that? I don’t want to buy a new PSU if the old one is still good. It has little over 5 years so it’s not exactly new but certainly not too old.

I also had one crash that looked like PSU fault since PC just shut down suddenly but I blamed it on some power drop in the grid at the time.

  • hypertown@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    5 months ago

    I thought about it but idk if it’d be safe to remove 24 pin while plugged in. I can’t disconnect it though as after unplugging it works just fine.

    • uhN0id@programming.dev
      link
      fedilink
      English
      arrow-up
      0
      ·
      5 months ago

      Just get a PSU from the store and test it on your. It’ll tell you very quickly without risking a potential fire hazard.

      • hypertown@lemmy.worldOP
        link
        fedilink
        English
        arrow-up
        0
        ·
        5 months ago

        I was more worried about frying the motherboard but I guess it’s not entirely impossible to blow up the PSU…

        • uhN0id@programming.dev
          link
          fedilink
          English
          arrow-up
          0
          ·
          5 months ago

          Fire hazard being messing something up by tinkering with the PSU. It’s not worth it over something that can be replaced for so little money. And I think it’s just more about swap out the most likely failing component (the PSU) and see if the problem goes away. If it doesn’t then you know it wasn’t the PSU.