I’ve had a laptop that I’ve never been able to get WoL (Wireless or otherwise) to work, no matter what I tried. Recently realized that the Bluetooth keyboard i used was able to wake it with a key press though.

I searched and found an ESP Home project that will make an ESP32 emulate a Bluetooth keyboard - https://github.com/dmamontov/esphome-blekeyboard/tree/main

Now for $6 of hardware, I can wake my Laptop up remotely via HA, whenever needed. Definitely recommended!

  • throw4w4y5@sh.itjust.worksEnglish
    0·
    9 months ago

    I must be too old school because my first thought when i read this was “with an old solenoid lying around and a few lines of code, an AtTiny could strike a key on the bluetooth keyboard, waking the laptop!

    • Gloria@sh.itjust.worksEnglish
      0·
      9 months ago

      You could ditch the solenoid and use a ATMega32u4 that can act as a HID device to send a keypress signal.

      • Panq@lemmy.nzEnglish
        0·
        9 months ago

        I’m mildly surprised OP’s laptop keeps the bluetooth radio powered up while asleep, but I would be a lot more surprised to find one that doesn’t work with USB HID.

        • ArmoredCavalry@lemmy.worldOPEnglish
          0·
          9 months ago

          I was a little surprised as well, but I think it’s because the keyboard / mouse I use (and the ESP32) all use Bluetooth LE specifically.

          I looked at USB solutions first actually, but then decided to try ESP Home solution since I was already familiar with the system.

      • The Pantser@lemmy.worldEnglish
        0·
        9 months ago

        My thoughts were a switchbot, for a non diy version. You put the bot on the laptop power button or keyboard.