I bought a Home Assistant Yellow from the Home Assistant people so it would just work. It came with an old software version and demanded an update. 9.x to 10.x went fine. It demanded another update. 10.x to 11.0 and it’s bricked. No HTTP. No SSH. No factory reset.
This is disappointing. At least I didn’t even have a chance to set anything up, so things work just as well with it dead.
You might still have console… Which if you get a readout over console you might be able to reflash to eeprom.
https://yellow.home-assistant.io/guides/use-serial-console-linux-macos/
https://yellow.home-assistant.io/guides/flash-cm4-firmware/
Good luck.
I had to reimage through serial/USB then the Raspi OS properly downloaded the current image. Thanks for the links getting me in the right neighborhood.
I mean this in the nicest way possible, but if this threw you for a loop, you’re in for a world of hurt once you get the software up and running. It’s not rocket science, but learning to administer any Linux server will take a little time. I’m sure it’s not bricked. Consider this an opportunity to learn how to write a new disk image and interact with your new server through the console.