I’m in the market for a nas or thinclient for these kinds of things, an upgrade for my RPi Home Assistant.
I’m stuck at hardware at the moment and think a cheap 2bay NAS is probably the way to go. My concern is that I won’t be able to run all the things on a NAS mainly because I’m clueless. This community talks in maths (as Radiohead say) so half the time I’m trying to decipher all the LXCs and other acronyms.
Anyway, I think I need to learn PROXMOX or Unraid so your comment has me interested.
My question to you is this: since your server is plugged in via ethernet, can you access the Windows VM via web interface? Or does it require a screen, keyboard, mouse, etc?
I think I’m gonna be running HA in a VM, along with Adguard and maybe LMS in docker containers, then probably a Windows VM for Arr and Plex. I assume all these things will have their own port but I’m just not 100% about the actual Windows VM
I run a couple of containers on my lenovo mini pc. I have proxmox installed on bare metal and then one VM for truenas, one for docker containers and one for home assistant OS.
For me the limiting factor is definitely RAM. I have 20GB (because the machine came with a 2x4GB configuration and I bought a single 16GB upgrade stick) and am constantly at ~98% utilization.
To be fair, about half of that is eaten up by TrueNAS alone due to ZFS.
The point I’m trying to make is basically make sure you can put enough RAM into your machine. Some NAS have soldered memory you won’t be able to upgrade. The CPU performance you need highly depends on what you want to do.
In my case the only CPU intensive task I have is media transcoding which can often be offloaded to dedicated bardware like intel quicksync. The only annoying exception is hardware transcoding of x265 media which is apparently only supported from intel 7th gen and upwards processors and I have a 6th gen i5… Or maybe I configured something wrong. No clue
Edit: I wrote that after reading the first half of your comment. Regarding connecting a screen, I think I had one connected once to set up proxmox. Afterwards I just log into the proxmox web interface. If required I can use that to get a GUI session of each VM as well.
Just to be sure there isn’t a misunderstanding. With 7th gen I mean any intel iX-7xxx processor or higher.
The first (or first 2) numbers of the second part of the processor name determine the generation of the processor. The number immediately following the i just denotes the performance tier within the processors own generation
Thanks for the correction. I’ve lurked in here and the Reddit one back before the time we don’t talk about, but I have no clue when it comes to hardware. I got given a PC to game on and was talking to my mate about buying server bits, and mentioned getting i7 processors. He told me it would be more powerful than my gaming rig because that’s only i5s.
This makes more sense. So I can get an i3-7xxx quad core mini PC and try upgrade the RAM and storage.
I have a bunch of ram sticks in a bottom drawer and some HDDs I’ve never managed to boot yet, so I have things to play with… I just don’t know what they are or if they work.
I love to tinker though. This all sounds like lots of fun
I’m in the market for a nas or thinclient for these kinds of things, an upgrade for my RPi Home Assistant.
I’m stuck at hardware at the moment and think a cheap 2bay NAS is probably the way to go. My concern is that I won’t be able to run all the things on a NAS mainly because I’m clueless. This community talks in maths (as Radiohead say) so half the time I’m trying to decipher all the LXCs and other acronyms.
Anyway, I think I need to learn PROXMOX or Unraid so your comment has me interested.
My question to you is this: since your server is plugged in via ethernet, can you access the Windows VM via web interface? Or does it require a screen, keyboard, mouse, etc?
I think I’m gonna be running HA in a VM, along with Adguard and maybe LMS in docker containers, then probably a Windows VM for Arr and Plex. I assume all these things will have their own port but I’m just not 100% about the actual Windows VM
I run a couple of containers on my lenovo mini pc. I have proxmox installed on bare metal and then one VM for truenas, one for docker containers and one for home assistant OS.
For me the limiting factor is definitely RAM. I have 20GB (because the machine came with a 2x4GB configuration and I bought a single 16GB upgrade stick) and am constantly at ~98% utilization.
To be fair, about half of that is eaten up by TrueNAS alone due to ZFS.
The point I’m trying to make is basically make sure you can put enough RAM into your machine. Some NAS have soldered memory you won’t be able to upgrade. The CPU performance you need highly depends on what you want to do.
In my case the only CPU intensive task I have is media transcoding which can often be offloaded to dedicated bardware like intel quicksync. The only annoying exception is hardware transcoding of x265 media which is apparently only supported from intel 7th gen and upwards processors and I have a 6th gen i5… Or maybe I configured something wrong. No clue
Edit: I wrote that after reading the first half of your comment. Regarding connecting a screen, I think I had one connected once to set up proxmox. Afterwards I just log into the proxmox web interface. If required I can use that to get a GUI session of each VM as well.
Hey no you answered a bunch of questions I had there. So I’m looking for an i7 with lots of RAM. Thanks that’s excellent
Just to be sure there isn’t a misunderstanding. With 7th gen I mean any intel iX-7xxx processor or higher.
The first (or first 2) numbers of the second part of the processor name determine the generation of the processor. The number immediately following the i just denotes the performance tier within the processors own generation
Thanks for the correction. I’ve lurked in here and the Reddit one back before the time we don’t talk about, but I have no clue when it comes to hardware. I got given a PC to game on and was talking to my mate about buying server bits, and mentioned getting i7 processors. He told me it would be more powerful than my gaming rig because that’s only i5s.
This makes more sense. So I can get an i3-7xxx quad core mini PC and try upgrade the RAM and storage.
I have a bunch of ram sticks in a bottom drawer and some HDDs I’ve never managed to boot yet, so I have things to play with… I just don’t know what they are or if they work.
I love to tinker though. This all sounds like lots of fun