Shoutout to whoever maintained my wifi drivers before i switched to ethernet (i forgot who they are lol)
A lot of Linux drivers are like this - just one or two people maintaining them. They usually eventually mainline the driver rather than having a separate Git repo though.
It’s mind boggling just thinking that things like this depend on the effort of one or two guys… while on the other hand, it’s not so uncommon that a team of engineers and developers fails to deliver a working (mostly) bugfree product.
I think management is who is responsible for the shitty decisions, as always… and, in general, just holding the team back.
What’s the deal with Nebraska? Are people from there like really polite and helpful?
It’s just a random location that was chosen for the joke, it’s in the middle of nowhere
Oh, OK, I think I get it, we have a place like that in jokes over here as well, except it’s made up 😂.
Based only on that comment, I’m going to guesssss… Germany?
No, a bit more south 😂.
Germans have that as well 😂? Wow, didn’t know that. Ours is called “Sviripichino”, it litelarly means “the place where you blow (play 🤔… like an instrument) on the pussy” 🤣🤣🤣.
There’s nothing to do in Nebraska except drink and maintain Linux drivers
Lol 🤣🤣🤣
The thing with drivers is that the hardware they’re written for doesn’t really change. A particular network card is always going to behave the same way. Once the driver works well, it’s pretty much complete, and the only changes that are needed are bug fixes, updates to handle new firmware, or adjustments if the kernel changes some implementation detail of how drivers are used. There could be months or years between updates to the driver.
Some manufacturers have great first-party Linux support. Intel is a good example - they contribute a lot of code to the kernel, and their drivers are maintained by employees.
There could be months or years between updates to the driver.
Yes, but someone still has to implement that “a thing or two” in it every few years.
Some manufacturers have great first-party Linux support. Intel is a good example - they contribute a lot of code to the kernel, and their drivers are maintained by employees.
Agreed. But, to be honest, most aren’t. Just take a look at Realtek. There’s bound to be at least one chip made by them on your board (in most cases, two, LAN and audio, two very crucial pieces of hardware).
Realtek NICs are junk (even the buggy Intel I225-v chip is better) so I try to avoid them, but I honestly haven’t ever checked which sound chip my motherboard uses. I’ll have to check if it’s a Realtek one. Realtek is generally the lower-end manufacturer for cheaper products.
Realtek is basically on every retail motherboard manufacturer. Gigabyte, Asus, MSI, Biostar, ASRock, etc. If you’re talking about hi-end or server grade motherboards, yeah, but let’s face it, the chips are cheap so they’re practically in every household.
I’ve got a “ASUS ROG Strix B550-F” which wasn’t exactly a high-end motherboard when I got it (I got it because it was cheap), but it’s got an Intel chip rather than a Realtek one. The lower-end motherboards have Realtek NICs but I usually don’t get the cheapest of anything since there’s usually a pretty big difference in quality if you spend just a little bit more.
The Intel I226-V chip on that motherboard is only $2.87 each (for quantities of 1000, even cheaper for large bulk orders) and the manufacturer can likely use the same PHY chip and timing components, so it doesn’t really increase the price a lot to use a non-Realtek chip.
ROG is a Republic Of Gamers edition motherboard… it’s probably a lot more expensive than the lower end models (like my Z97-K board for example… and that wasn’t cheap as well, like 100€ back in the day).
I guess the definition of “cheap” varies from person to person. My definition of cheap is lower end (50, 60€ tops) motherboards. I don’t buy those either, but make no mistake, they’re a common household item in 3rd world countries (I can vouch for that).
I have no idea what the prices are for a Realtek NIC vs. other manufacturers. All I know is, they’re usually the default choice for cheaper models… which probably means they’re dirt cheap. Have no idea how this compares to Intel or other manufacturers (Marvel, Qualcomm, etc.).
In general, yes, those NICs are cheap. But, let’s take USB to Ethernet adapters. I don’t think Intel has a solution for those things… or if they do, it’s probably more expensive than the one Realtek offers. It’s $5 on AliExpress. They’re not great, but they get the job done (no wifi, no onboard etherent plug on a brand new laptop, and you need internet to get it up to date with drivers). I haven’t looked for anything else since this one does a great job, but I guess that, even if there is an Intel based solution out there, it’ll be at least tripple the price of the Realtek one.
Its these kind of people that give me hope
The astounding thing is history is full of these types of people when you peel back the “couple great men” narrative of history and actually look at how good things happened, it is kind of bewildering.
To be honest, yes. In general, not just tech or Linux related stuff. You look at humanity and what it has come down to, and then you notice these people… and hope fills your heart again.
The vast majority of my open source projects, I’m the only user. I release it open source because back in the day, GitHub only allowed open source projects if you want to use it.
But another reason is the hope that someone will find it helpful. If not the project itself but maybe the code.
I have one project that has a significant following and honestly it’s sometimes very scary because I might not want to keep it updated because of my own interests changing.
That’s the great thing about open source though. Sure, you might drop off the face of the earth tomorrow. But if you do, the code is there, and maybe someone who was using it clones the repo and carries on that work.
One of the best parts about Linux. So much is open source which means your 20 year old hardware still likely has support.
Unfortunately, the RTL8812AU isn’t 20 year old hardware (then it might get a pass) - it’s current gen stuff
And shoutout for this one too: https://github.com/tomaspinho/rtl8821ce
Otherwise I wouldn’t have a functional WiFi card either.
Send your thanks directly to the maintainer (preferably email/mastadon/twitter/etc, not a ticket)! Open source maintainers don’t get a lot of positive direct feedback.
And if you have some coins to spare, don’t hesitate to donate 😊 it’s hard spending time for no money in this world right now.
I use this too on my laptop.
Shoutout to https://github.com/clnhub/rtl8192eu-linux for monitor mode and packet injection <3
Well, I’ll give him a star :-)
Wait i think that was the wifi driver i used
For all we know, he does wear a cape.
I wish capes were socially acceptable to wear again
I’d settle for a cloak. A nice leather, or heavy woollen cloak would be amazing for being outside on cold evenings.
Unfortunately, they are still seen as dark and ‘edgy’. Moreso even than a trenchcoat. ☹️
Stop giving so many fucks about what other people think about your fashion. You do you, fam.
Unfortunately, it would likely be detrimental to my ongoing work situation.
Though saying that, the BBC had a guy who would turn up to work dressed as a wizard (think harry potter style). He was the reason Teletext continued for so long. He was the last one left on the team. They retired Teletext the day after he retired himself.
I’m still not sure I have the force of personality to not just look like an idiot try hard however. 🤷♂️
Went camping at a festival my band was playing at. I had a woolen cloak as part of my costume. Everyone was shivering. I was loving life.
Maybe a rainbow unicorn cloak?
Tempting… Unfortunately, I don’t think I could pull it off. You need a certain… force of personality to pull off something like that. I’m just not outgoing (or skilled!) enough to pull off a full Thom Merrilin look.
And get stuck in turbines and shit?
NO CAPES!!!
lucky for me I don’t often interact with things like that
How about revolving doors?
Or doors on a bus, or elevator, or escalator (depends on the length of the cape)
Break away fasteners are a thing now. Line it with some Kevlar fibre and some good thermal insulation/fire resistance and you have an amazing utility device.
In public, it billows behind you, making you look dashing and heroic. When the shit hits the fan, instant bullet resistant cover for civilians. A way to shield them from the heat of a fire, or a small explosion. You could even use it offensively to tangle or deceive an opponent!
Someone is trying to be a real word superhero.
You should talk to that guy who made bulletproof Kimonos for Steven Seagal
Imagine if you suddenly get cornered by a runaway bull. What would you do without a cape?
There is absolutely no way in hell a bullet-proof cape is billowing in the wind.
It won’t stop a direct shot, but it would help against ricochet and shrapnel.
Back during the Napoleonic wars, silk underlayers were highly sought after. They could limit the damage a musket ball could do.
A spider silk based cape could definitely help projectile damage, while still being able to billow. The challenge would be making it fire and heat proof as well.
It’s more of a projectile resistance than full proofing.
You’ve just sold this idea to public schools in America.
That works but the fastener can’t be metal. Come across somebody with magnetic powers or for some reason the metal gets heated up and welds to itself… Bad times. But I think you’re onto something.
Agreed on the metal clips. Getting garrotted by your own safety system would be extremely detrimental in a fight. Though saying that, if you’re in a fight with a metal telekinetic, you’re either screwed, or strong enough to not care about the clip.
Be the change you want to see.
just wear them already
I remember early 2020, there was a small push to bring capes back, before something else took over every discussion. Something about blue jays or crows or something
yes, I remember the Cape Revolution. I actually did buy a cloak! it took me like a year to wear it though. finding more to purchase is not easy
Why aren’t these drivers installed by default yet
They’re still waiting to be mainstreamed into the kernel. The process of integrating drivers into the kernel is complicated. Coding practices of the coder that wrote the driver play a large part in that. Buggy or badly written code will not get accepted. Not all of these drivers have the code quality that is required in order to be merged with the kernel.
Shoutout to screenshot tools
Shoutout to this guy for maintaining my mainboards temperature sensors and pwn fan headers: https://github.com/Fred78290/nct6687d
Without this and https://github.com/codifryed/coolercontrol my PC was either a jet engine from the sounds or a nuclear reactor from heat constipation.
Some dude wrote a driver for the temp sensors on my motherboard… Then quit maintining it because people were being shitty
https://github.com/a1wong/it87
DRIVER REMOVAL NOTICE ===================== I have been unable to meet support demands for this driver, resulting in unpleasant experience and frustration for everyone involved. Consequently, the driver will be removed from github, effective August 1, 2018. Interested parties are encouraged to clone the driver before that time and to start maintaining it on their own.
Wow, thats just plain stupid. I hope someone forked it.
This guy still maintains it87: https://github.com/frankcrawford/it87
I’ve was using his for years on my old motherboard, since the mainline it87 didn’t play nicely.
Thought I should mention, he is also slowly adding his changes to the mainline kernel.
Fred78290 is the man. Much better than Fred78920
Of course he’s better, he’s a whole 630 Freds above the other one.
But on the whole, every Fred counts.
Software discoverability on linux sucks so much omg. I was looking for something like coolercontrol for almost forever and I find it now that I dont need it anymore.
Uh, really? I find it to be much easier.
apt
contains almost everything, and for a niche thing like yours, a Google foraio fans linux
came back with the first result of a reddit thread including the above software, and liquidctl which it uses and is all over the place. I have way more trouble finding things for Windows, but maybe that’s because 98℅ of my use case isn’t gaming.i searched it at the time and all i could ever find was fancontrol.
which is fine and solved my problem, but 99% of niche linux software i use was found through forums like lemmy, on recommendation of other nerds. hardly a good way to find it quick.
ideally searching a distros app store should find almosy everything, more or less like android can do today.
While I agree with the sentiment, you’re comparing a mobile OS, built that way from the ground up, to a desktop OS. The same problem exists in Windows and MacOS.
Oh hey I have the same wifi card series (little usb dongle thingy). I use the aircrack drivers when i use it. https://github.com/aircrack-ng/rtl8812au
There’s such a lot of those heroes! I have some weird USB WiFi thing and there’s someone maintaining a driver for it!
Yo I’m looking for something like that right now for Linux, what’s the name of it??
Wifi dongle?
This is a list of USB WiFi cards endorsed by FSF
Ohhh, I thought it was like a PDAnet alternative lol. Thanks anyways!
Easytether worked well for me on Android. They have Linux drivers.
I use Debian 12 and couldn’t get it running, not sure how to find the older dependencies :/
A god among men
This is the link to the GitHub repository https://github.com/morrownr/8812au-20210629 Give them a star.
(I also looked for a donation link, but couldn’t find one.)