In the past two weeks I set up a new VPS, and I run a small experiment. I share the results for those who are curious.

Consider that this is a backup server only, meaning that there is no outgoing traffic unless a backup is actually to be recovered, or as we will see, because of sshd.

I initially left the standard “port 22 open to the world” for 4-5 days, I then moved sshd to a different port (still open to the whole world), and finally I closed everything and turned on tailscale. You find a visualization of the resulting egress traffic in the image. Different colors are different areas of the world. Ignore the orange spikes which were my own ssh connections to set up stuff.

Main points:

  • there were about 10 Mb of egress per day due just to sshd answering to scanners. Not to mention the cluttering of access logs.

  • moving to a non standard port is reasonably sufficient to avoid traffic and log cluttering even without IP restrictions

  • Tailscale causes a bit of traffic, negligible of course, but continuous.

  • z3bra@lemmy.sdf.org
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    I get what you say, and you’re definitely not wrong to do it. But as I see it, you only saved ~80Kib of ingress and a few lines of logs in the end. From my monitoring I get ~5000 failed auth per day, which account for less than 1Mbps average bandwidth for the day.

    It’s not like it’s consuming my 1Gbps bandwidth or threatening me as I enforce ssh key login. I like to keep things simple, and ssh on port 22 over internet makes it easy to access my boxes from anywhere.

    • oatscoop@midwest.social
      link
      fedilink
      English
      arrow-up
      0
      ·
      edit-2
      1 year ago

      I don’t get why people leave interfaces the public doesn’t need access to open to the public – especially SSH.

      Use a VPN if you need access to those interfaces from the “outside”. They’re stupidly easy to set up these days, particularly with Wireguard.

      • z3bra@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        A VPN is easy to setup (and I have it setup by the way), but no VPN is even easier. SSH by itself is sufficiently secure if you keep it up to date with a sane configuration. Bots poking at my ssh port is not something that bother me at all, and not part of any attack vector I want to be secure against.

        Out of all the services I expose to the clear web, SSH is probably the one I trust the most.

    • aesir@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      0
      ·
      edit-2
      1 year ago

      ssh -p 12345 would leave your boxes accessible from anywhere too. Other blocks of IPs receive 10 times or more requests, as scanners can focus on blocks of ips from major providers.

      • z3bra@lemmy.sdf.org
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        Yeah I know, I just don’t really care about that traffic to bother changing it :) Also, I’m talking about a server hosted on Hetzner, so I feel like it’s scanned a lot.

  • u_tamtam@programming.dev
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    Or, you know, just use key auth only and fail2ban. Putting sshd behind another port only buys you a little time.

    • nomadjoanne@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      Yeah but the majority of bots out there are going after easy prey. Honestly, if you use public key authentication with ssh you should be fine, even if it is on port 22. But it does of course clog up access logs.

      • marcos@lemmy.world
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        The majority of bots out there are stopped by just using a hard to guess password. It’s not them that you should be worried about.

        • aard@kyu.de
          link
          fedilink
          English
          arrow-up
          0
          ·
          1 year ago

          The majority of bots doesn’t even show up in the logs if you disable password auth in the server config, as you typically should.

  • Decronym@lemmy.decronym.xyzB
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    1 year ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    DNS Domain Name Service/System
    HTTP Hypertext Transfer Protocol, the Web
    IP Internet Protocol
    SSH Secure Shell for remote terminal access
    UDP User Datagram Protocol, for real-time communications
    VPN Virtual Private Network
    VPS Virtual Private Server (opposed to shared hosting)
    nginx Popular HTTP server

    7 acronyms in this thread; the most compressed thread commented on today has 9 acronyms.

    [Thread #42 for this sub, first seen 14th Aug 2023, 15:55] [FAQ] [Full list] [Contact] [Source code]

    • elscallr@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      Computers communicate across networks using ports. Port 22 is a commonly used remote administration port called ssh. Bots go around probing computers with an open port 22 hoping to find badly secured or outside misconfigured ssh servers to turn them into bots and crypto miners, etc.

  • James@lemmy.ca
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    Public key auth, and fail2ban on an extremely strict mode with scaling bantime works well enough for me to leave 22 open.

    Fail2ban will ban people for even checking if the port is open.

    • JubilantJaguar@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      If Fail2Ban is so important, why the h*** does it not come installed and enabled as standard?!

      Security is the number-1 priority for any OS, and yet stock SSHD apparently does not have Fail2Ban-level security built in. My conclusion is that Fail2Ban cannot therefore be that vital.

    • devtimi@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      Honest question, is there a good default config available somewhere or is what apt install fail2ban does good to go? All the tutorials I’ve found have left it to the reader to configure their own rules.

  • Feathercrown@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    I opened a raw text channel on the Telnet port for a personal game engine project and someone tried to enable commands and do some shady stuff. Unfortunately for them, that’s not a valid chess move.

  • spagnod@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    Just do it properly and configure sshd securely. When you have a machine exposed to the internet, you should expect it to be attacked. If you really want to give the finger to bots, run endlessh on port 22 and keep sshd on a non-standard port. Stay safe.

  • Clou42@feddit.de
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    I’ll take that tiny amount of traffic telling scanners there’s no password auth over having to remember port settings for ssh, scp and rsync any day.

    • lando55@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      For me it’s not about the traffic, more the log spam.

      Generally I’ll have :22 enabled internally, and anything non-standard is defined in ~/.ssh/config and shared out so I don’t have to remember things.

  • notabot@lemm.ee
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    You really shouldn’t have something kike SSHD open to the world, that’s just an unnecessary atrack surface. Instead, run a VPN on the server (or even one for a network if you have several servers on one subnet), connect to that then ssh to your server. The advantage is that a well setup VPN simply won’t respond to an invalid connection, and to an attacker, looks just like the firewall dropping the packet. Wireguard is good for this, and easy to configure. OpenVPN is pretty solid too.

    • douglasg14b@lemmy.world
      link
      fedilink
      English
      arrow-up
      0
      ·
      1 year ago

      You say this and are downvoted.

      While we are coming off the tail of Def Con where there where a plethora or small talks and live examples of taking advantage and abusing just this.

      • TheLemming@feddit.de
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        I don’t understand your comment, what you are saying. Could you elaborate a bit, please? I’m interested why it’s a bad idea what previous comment suggested.

        Of course I can dig into DefCon videos and probably would do if needed, but perhaps you know what exactly the issue is

        • MaggiWuerze@feddit.de
          link
          fedilink
          English
          arrow-up
          0
          ·
          1 year ago

          The first this means the comment he answered to and the second one means ssh being used as an attack surface, being described in defCon talks

      • teawrecks@sopuli.xyz
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        Just trying to parse your comment, I assume your first “this” and second “this” are referring to different things, right?

  • elscallr@lemmy.world
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    1 year ago

    If you do want to open 22, and there are plenty of good reasons to want to, just implement something called port knocking and you can do it safely.

    Note with this you still need good authentication. That means no passwords, key based auth only.

    • FarraigePlaisteach@kbin.social
      link
      fedilink
      arrow-up
      0
      ·
      1 year ago

      I have read elsewhere that port knocking is just security through obscurity and isn’t worth considering. I found it when searching for ways to set it up and that put me off.

      • Ondergetekende@feddit.nl
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        Security through obscurity is a very valid way to secure something. It shouldn’t be the only way of securing something, but it can be a valid additional layer.

        The knock sequence is a secret, just like a password. It may not be a particularly strong secret, but is is strong enough to keep out casual attackers. You’ll still need additional security, but sshd is well equipped to provide that.

      • Hector_McG@programming.dev
        link
        fedilink
        English
        arrow-up
        0
        ·
        edit-2
        1 year ago

        If you want to go down that path, a password is only security by obscurity.

        Port knocking is an extra layer of security, and one that can stop attackers from ever knowing your private server even exists. A random scanner won’t even see any open ports.

        Always bear in mind that any random guy advising people not to use port knocking may be doing it with malicious intent. I’m sure there’s someone out there advising that random passwords are a waste of time, and everyone should just use monkey123.