These are just examples, I have no opinion on what is the best.
Something like: I like the cameras from the Galaxy s23, the processor from the latest Pixel, the memory from the Razor. I mean whatever. I suppose Iphones could be included, but I figure it’s more locked in than androids, I could be wrong.
Or even replacing a part from one phone with one that’s better, for personal use? Like, even just putting pixel 7 cameras into a pixel 8 phone.
Besides the factory warrenty, and money spent, is it software? Is it having to reconfigure the hardware? Is it just space in general?
If we all have things we don’t like about our phones, why aren’t we able to just make it more to our liking?
Essentially time and cost? Building such a Frankenstein-Phone would probably take you half a year to design the PCBs, get all the connections and power rails right, all the needed peripheral electronics for the chips. You’d need a lab and equipment do build it, and the mechanics and encasing. And probably some takes and failed iterations. And software and drivers also have to be rewritten and patched.
Well that seems like more effort than it’s worth… I figured the biggest issue would be fitting it into the phone, but that sounds like least of the worries.
Right. I mean these things are really complex, usually not made to be repaired (i.e. modular) and lots of things are purpuse built to fit in that small form factor. Components are scattered around because there was some space left somewhere on a PCB and some components share a purpose, which makes it difficult to entangle the electronics…
And it’s always difficult to compete with mass-manufactured products. I like to tinker with electronics or build things at home. I learn a lot of things while doing it. And I get things that are unique and built spefically for my purposes… But usually they’re not cheap(er) than mass produced products, because I don’t buy supplies in bulk and it takes me days to build one thing while a production line can pump ot thousands of devices in the same timespan.
And I ocassionally repair (household) devices or just take apart broken ones for shits and giggles… And some of them immediately look like they just aren’t meant to be repaired or modified. Some components like a phone screen, camera or even the backlight or power supply of a broken flat screen TV can be messed with. But it usually ends with complicated PCBs. You can replace broken components (if you got the correct tools), but you can’t really change much about them without going through an laborious process of reverse-engineering and maybe designing a whole new PCB (from scratch). Which makes sense for smaller projects, but it’s just not feasible for complex devices like phones/laptops/TVs that aren’t meant to be repaired. Or where every design choice contradicts serviceability like with phones and cramming everything into the small slab.