Nothing beats a wire. For a small apartment with a few lighting circuits, sure, spend $500 on some wireless doodads. Now you’re stuck relying on software updates and firmware updates by your router, your wireless bridge, your smart buttons, your lighting fixtures, your mobile OS, the lighting app, and maybe another app to combine everything, not to mention your “smart speaker” if you want to yelp your commands into the air. On the other hand, if you get everything from one manufacturer, it’s built on an isolated network that grants access to your mobile device and the system is self contained and essentially bulletproof until the power goes out.
Both wireless and proprietary/single-supplier are deal-breakers for me. As such, stuff like what you install (presumably Crestron or similar) is just as worthless to me as the shit from Amazon. Basically, between surveillance capitalism and vendor lock-in, nobody in the industry wants to meet my needs. So I’m either going to have to resign myself to having a “dumb” house forever, or build the whole damn system from scratch myself with blackjack and hookers Arduinos and Home Assistant!
There’s nothing wrong with building it yourself other than you need to acquire all the skills to do so and source all the components yourself and figure it out on your own when it doesn’t work. If that works for you, that’s great.
Crestron and Lutron stay out of the consumer market, in part, because you need to be a licensed electrician to install components of their systems. I can tell you from experience, even with the right training and certification, it’s very easy to blow something out. And when something doesn’t work, you have them for tech support and you get a great warranty. The stuff is rock solid and works for decades. I rather buy a home with a single supplier system than one that was hobbled together. Because when I then have a problem with something or want to upgrade the system, I know who to call and what the options are.
I hate battery items, and when I can I like wired. But retrofitting a 70 year old home with all that won’t be easy or cheap. I’ve already had to redo all my outlets and run new wires.
Other disadvantages for me are:
I have to know what I want at the beginning
The vendor has to support or sell a specific solution for whatever device I want
I can’t slow roll it as I can afford it
Upgrades aren’t going to be easy or cheap.
But I am an IT director. So I know my way around networking, programming, and system/server admin. I can segment, design, and secure the networking between the devices and run whatever systems I need for automation. I’ve run Ethernet throughout the house and am not afraid of cutting holes.
I’m trying to tie in some professional systems like Dante audio instead of smart speakers. Even though that means I’ll probably need a dedicated audio server.
And I’m tying in a lot of legacy protocols too. Like artnet and DMX for a lot of the show control systems I have. It’s really great being able to use so much dissimilar stuff and be able to control it from a single dashboard.
I can also automate temporary things like holiday lights or my big Halloween displays. I end up wiring most of my cars lights to DMX controlled relays and dimmers. Add fog machines and audio cues that I can sync up together.
That’s pretty much what we do (including retrofitting 200+ year old farm houses). Just replace your home server with a Crestron box. For people who want to tinker on a regular basis, we could (I have) easily build them a custom interface but you certainly fit the bill of someone who should do it themselves. You’ve chosen this as a hobby and a life long commitment.
You know what they say about plumbers… always a leaky pipe in their house. Having been in the industry for decades, the last thing I want to do when I get home from work is futz around with networking and programming. I have wireless Ikea lighting. The battery has been dead on one of my smart buttons for a month and I’m too lazy to take two minutes to swap it.
Both wireless and proprietary/single-supplier are deal-breakers for me. As such, stuff like what you install (presumably Crestron or similar) is just as worthless to me as the shit from Amazon. Basically, between surveillance capitalism and vendor lock-in, nobody in the industry wants to meet my needs. So I’m either going to have to resign myself to having a “dumb” house forever, or build the whole damn system from scratch myself with
blackjack and hookersArduinos and Home Assistant!There’s nothing wrong with building it yourself other than you need to acquire all the skills to do so and source all the components yourself and figure it out on your own when it doesn’t work. If that works for you, that’s great.
Crestron and Lutron stay out of the consumer market, in part, because you need to be a licensed electrician to install components of their systems. I can tell you from experience, even with the right training and certification, it’s very easy to blow something out. And when something doesn’t work, you have them for tech support and you get a great warranty. The stuff is rock solid and works for decades. I rather buy a home with a single supplier system than one that was hobbled together. Because when I then have a problem with something or want to upgrade the system, I know who to call and what the options are.
I hate battery items, and when I can I like wired. But retrofitting a 70 year old home with all that won’t be easy or cheap. I’ve already had to redo all my outlets and run new wires.
Other disadvantages for me are:
But I am an IT director. So I know my way around networking, programming, and system/server admin. I can segment, design, and secure the networking between the devices and run whatever systems I need for automation. I’ve run Ethernet throughout the house and am not afraid of cutting holes.
I’m trying to tie in some professional systems like Dante audio instead of smart speakers. Even though that means I’ll probably need a dedicated audio server.
And I’m tying in a lot of legacy protocols too. Like artnet and DMX for a lot of the show control systems I have. It’s really great being able to use so much dissimilar stuff and be able to control it from a single dashboard.
I can also automate temporary things like holiday lights or my big Halloween displays. I end up wiring most of my cars lights to DMX controlled relays and dimmers. Add fog machines and audio cues that I can sync up together.
But I do know that I’m a nerdy edge case here.
That’s pretty much what we do (including retrofitting 200+ year old farm houses). Just replace your home server with a Crestron box. For people who want to tinker on a regular basis, we could (I have) easily build them a custom interface but you certainly fit the bill of someone who should do it themselves. You’ve chosen this as a hobby and a life long commitment.
You know what they say about plumbers… always a leaky pipe in their house. Having been in the industry for decades, the last thing I want to do when I get home from work is futz around with networking and programming. I have wireless Ikea lighting. The battery has been dead on one of my smart buttons for a month and I’m too lazy to take two minutes to swap it.