That’s standard Markdown syntax for embedded links: instead of linking, just show the content. Usually only for images but I think some sites will allow audio (and video?!) embeds as well.
Yes, video too, but support by clients is inconsistent (some don’t show playback controls and loop it like a gif, some just display a link). By default, the media hosting server allows for up to 900 frames (up to 30-37 seconds of smooth video) and 2160p; the audio track is removed; the filesize limit is 40 MiB (most instance owners set it way lower, perhaps 5 or 10). There is a caveat: all media must be encoded to a single codec of the instance owner’s choice: VP9 (default), H264, H265, AV1, VP8. Uploading in one of the others is possible but beware: it is going to be reencoded by the server, and if the process doesn’t finish within the timeout of 30 seconds, you get the error ffmpeg timed out. In 30 seconds, a server without HW acceleration will typically only process a very short video (for feddit.org, it’s about 1 MiB’s worth of H265) so anything longer than a few seconds will fail! To take advantage of the full upload limit, you must reencode the video yourself to VP9 or whatever other codec is set (you can tell by uploading a tiny file in any codec and inspecting the output).
You can use the following command to reencode the video to VP9:
ffmpeg -i input.mkv \
-r 899/<duration> `only use this for longer videos where you need to reduce frames to 900` \
-c:a libopus -b:a 48k `audio will probably be removed anyway` \
-c:v vp9 \
-crf 32 `constant quality mode, lower is better quality, try finding lowest value satisfying filesize limit` \
output.webm
Alternatively, just use a more lenient hoster like GitHub or catbox.moe and embed the file from there.
https://i.servimg.com/u/f41/19/88/36/99/img_0927.jpg
That’s why these exist.
Darn it. Can you not hotlink images in Lemmy?
Next time you can just upload the image and it will embed it in your comment.
FWIW your link worked just fine. Also disallowing hotlinking is the decision of the web server hosting the image, not Lemmy.
You can. Most instances run image hosting too.
Oh, do you need the “!” in front of the link? I tried something like that at first and it showed nothing
That’s standard Markdown syntax for embedded links: instead of linking, just show the content. Usually only for images but I think some sites will allow audio (and video?!) embeds as well.
Yes, video too, but support by clients is inconsistent (some don’t show playback controls and loop it like a gif, some just display a link). By default, the media hosting server allows for up to 900 frames (up to 30-37 seconds of smooth video) and 2160p; the audio track is removed; the filesize limit is 40 MiB (most instance owners set it way lower, perhaps 5 or 10). There is a caveat: all media must be encoded to a single codec of the instance owner’s choice: VP9 (default), H264, H265, AV1, VP8. Uploading in one of the others is possible but beware: it is going to be reencoded by the server, and if the process doesn’t finish within the timeout of 30 seconds, you get the error
ffmpeg timed out. In 30 seconds, a server without HW acceleration will typically only process a very short video (for feddit.org, it’s about 1 MiB’s worth of H265) so anything longer than a few seconds will fail! To take advantage of the full upload limit, you must reencode the video yourself to VP9 or whatever other codec is set (you can tell by uploading a tiny file in any codec and inspecting the output).You can use the following command to reencode the video to VP9:
Alternatively, just use a more lenient hoster like GitHub or catbox.moe and embed the file from there.
