West Systems 105 epoxy and 205 fast hardener. Roughen the area with some 220 grit sand paper, blot on some epoxy with a chip brush, wrap in fiberglass. Repeat until you have 2-4 layers of fiberglass. Use epoxy with 406 high-density filler to blend the edges if desired. Vacuum bag it until the epoxy has cured. Wet sand smooth if necessary, working up to 4000 grit.
West Systems 105 epoxy and 205 fast hardener. Roughen the area with some 220 grit sand paper, blot on some epoxy with a chip brush, wrap in fiberglass. Repeat until you have 2-4 layers of fiberglass. Use epoxy with 406 high-density filler to blend the edges if desired. Vacuum bag it until the epoxy has cured. Wet sand smooth if necessary, working up to 4000 grit.
Sir, this is a dollar spatula.