I have an unused Raspberry Pi 4 (2GB model) lying around and I would like to install OpenWRT on it and use it as a router. I get Internet from DSL so I can’t hook it up on the Raspberry Pi directly, I need to plug an Ethernet cable coming from my actual router to the Pi.

I am no expert on networking, so please forgive me if I say something that is wrong. I want the WAN coming in from the router from the Pi’s Ethernet port, and the LAN coming out as Wi-Fi. I may also stick an additional Ethernet adapter to it in the future. I have tried doing this many times and have failed. So, could anyone explain to me how could I do this?

Also, what are VLANs, what are their uses and if I wanted one, how could I setup it in OpenWRT?

Thanks in advance.

  • hendrik@palaver.p3x.deEnglish
    0·
    2 months ago

    Nice.

    Cameras definitely need some more bandwidth. And their presence has a bigger impact on your privacy than the lightswitch. So you might as well do it right… I agree.

    Me and by brother-in-law also each bought one of the 4 packs of cheap smart plugs with power metering. He had 2 fail after some years. But I guess he was just a bit unlucky. In our experience they’re pretty reliable overall. And the 2 failed safe(ly). They just stopped switching and didn’t burn down. I’m not 100% convinced, I use a more expensive brand one to make my washing machine smart since it draws a lot of power. But I use the cheap ones for everything else.

    I -myself- am a bit reluctant towards cameras and smart speakers that listen in to arbitrary things. But that’s just personal preference.