Hi all,
UPDATE: I closed the post (the timebox I gave myself to understand the issue is now over). Thank you all for the help ^^
DISCLAIMER: The objective of this post is to understand how people would debug issues like these when real data is involved and get to the bottom of the problem. The objective is NOT to “restore service” but to understand what failed. The tone of the post is voluntarily not serious to keep it light.
I am playing a little with TrueNas Scale and ZFS. I was trying to use a second NVME disk via USB to do a replication once a day of the main pool, however I had issues with this secondary pool being SUSPENDED for “too many errors”. This pool is not directly write/read by users/apps, but it is just there to be “replicated on” once a day.
Now, please, I know that using disks via USB is not advised. Also I am not interested in recovering the data, since there is nothing real on it. What I am doing is testing to see if the system is brittle, and if it is, how to debug if there is a real issue.
Now to the point. The pool is SUSPENDED. Good. Why? I mean, the real reason why. To see if the system can be used in real life it needs to be debuggable.
Let’s start. The pool is SUSPENDED:
pool: tank-02
state: SUSPENDED
status: One or more devices are faulted in response to IO failures.
action: Make sure the affected devices are connected, then run 'zpool clear'.
see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-JQ
config:
NAME STATE READ WRITE CKSUM
tank-02 UNAVAIL 0 0 0 insufficient replicas
xxx-xxx-xxx-xxx-xxx FAULTED 3 0 0 too many errors
errors: 4 data errors, use '-v' for a list
To which you may ask: why? Too many errors (the -v says nothing more). Well that doesn’t help, does it. When you run zpool clear:
# zpool clear tank-02
cannot clear errors for tank-02: I/O error
Incredibly useful as you can see. dmesg to the rescue?
WARNING: Pool 'tank-02' has encountered an uncorrectable I/O failure and has been suspended.
Thanks? I guess. I know it it trying to safeguard data but again… why?
Before you ask:
- SMART checks are good
- Yes, I restarted the device. As soon as you try to use/mount/import you get to the same issues.
- Nothing else peculiar in dmesg. I mean the USB was
usb 2-4: USB disconnect, device number 12
whatever the reason why. I mean, kick me if I know why TrueNas scale decided that having/sys/module/usbcore/parameters/autosuspend
to2
is a good idea but again, that is not the point. I need ZFS to reply to me what is the issue for its point of view.
I have read a lot online. Maybe it is the temperarure (usb enclosure heating up), maybe it is the cable, power, “it is the usb controller”, or the chipset doing the usb -> nvme… However, therey are not saying what to check. People is guessing. I saw more tech behind reading tea leaves.
My question for you all is this: ZFS SUSPENDED one of my pools. It (seems to me) is refusing to fix it. Refusing to do anything with it and to tell me why. So, in a real world case, how to debug it? If I have to trust my data to it, I don’t want the only option to be “use many disks and just replace one and the cable when ZFS poo-poo”.
How to know the cause?
Thank you for the help.
PS: I am sure I am missing some very basic ZFS knoweldge on the topic, so please let me know what else can I do to make ZFS talk to me.
Hi.
There is one usb drive in an nvme enclosure without their own power supply. I know the brand and I can find the chipset however what I need to understand is the issue from the logs.
What does it point to and what to look for to understand it?
Thanks.
PS: Just for curiosity I did swap the enclosure days ago and the cable but had the same issue, so the error message is not specific to it. Also I was using this enclosure as the main disk for one of my PI with no issue, so power via USB or cable should not be the problem. Not that I want to use that as metric, I need data/logs from the OS.