Hey, I’m always searching a home server (already post here https://lemmy.ml/post/15083947), I was thinking about a Lenovo P500, but maybe the PSU is a bit too special… My budget around $140, will buy used parts and one of the most important thing is the power efficiency (don’t care about the peak wattage but want to stay around 50W idle and settling at about 70W when doing some work). Preferably I wouldn’t like to buy mini PCs. 😃 Thx!
Most mainboards in full-sized PCs aren’t optimized for power efficiency. But there are some (few) efficient mainboards and PSUs available.
The german c’t magazine publishes guides to build efficient home-servers or workstations every other year. But that’s well above your budget: https://www.heise.de/ratgeber/Bauvorschlag-fuer-einen-sparsamen-Heimserver-aus-c-t-3-2024-9587594.html (400€ new, 17W idle)
The Lenovo seems to draw around 45 Watts on idle. You could go well below 20 Watts if you wanted.
I’d say for most power efficiency along an extremely low budget, you want an old laptop as a home server, or a mini pc like an Intel NUC. But you might want to refine your requirements… What do you need that thing for? How many SATA-Ports etc do you need? Are you more willing to compromise on price or power efficiency?
I’m going to check the German article but maybe that’s a bit above my budget.
How do you think that I could reach 20W with the P500?
I have a very low budget but you know, I don’t want to get that kind of laptop or mini pc (due to their lack of upgradability), I don’t necessarily want 10W power draw only want to not idle at more than 70…
I want to have at least 6 SATA ports (could upgrade it with a pcie card later) and some pcies ports. In fact if the machine is around $150 but has terrible power efficiency I wouldn’t choose this thing. So I want to both 😅 but if a machine would be great and has lower specs that I was expected I would take it anyways.
Hmmh, No I don’t think you can make the idle power consumption go down. Sure, you got to set the right options in the BIOS and Linux. But there is a baseline and that’s with which chipset the mainboard was designed and what kind of components they chose.
And there’s the efficiency of the power supply. Usually they’re built to have a certain degree of efficiency (>80% or >90%) but that’s measured at a certain percentage of the maximum power draw. They’re not at all that efficient at 40W draw. You’d need an expensive PSU not to lose additional efficiency at low power. And generally they don’t come with a standard PC.
So you’d probably end up replacing half of the components of a standard PC while making it more power efficient. And I don’t think that’ll be cheap. You better find something that’s already designed to factor that in. Sadly it’s not what they print on every PC. You have to look for that info and sometimes it’s buried in some PC magazine forum or on Reddit.
I think mostly it’s about the mainboard. Most of the time there are some chipsets that are known to be more power efficient than others. But I’m not up to date anymore and can’t give any good recommendations.
If you want it cheap and most power efficient, generally the advise is to use an old laptop. They’re made to idle at like 10-15W. But you won’t get any SATA ports that way. You’d need external HDDs and connecting them via USB isn’t really super reliable. It’s frowned upon to use a setup like that for RAID or advanced things… But it’s how I started back in the day.
With the upgradability it’s always the question. That’s an additional requirement that makes it more difficult. If it’s an old machine you could end up needing to replace most of it anyways, since you need a new mainboard for a new CPU and along with that the next generation of RAM and then you’ve replaced most of your computer anyways. I’d say there is a limited window of opportunity when upgrading makes sense. But if you’re buying an old machine it may not always be a good idea to make it a requirement.